Le Dioxyde de silicium, également connu sous le nom de silice, est un excipient. Il est multifonctionnel et rendra le processus de fabrication plus facile. Le dioxyde de silicium est un ingrédient inerte. Cela signifie qu’il ne réagira pas avec les autres ingrédients que vous êtes en train d’utiliser ou substances dans le corps. Cela rend à la fois la fabrication et la digestion plus facile. Il a un point de fusion et un point d’ébullition plus élevé et est insoluble dans l’eau. Il a des qualités naturelles et synthétiques mais chacune ont une composition chimique identique. Il est souvent utilisé car il augmente la fluidité et arrête l’accumulation sur l’outillage.
Le Dioxyde de silicium absorbe l’humidité de ses alentours. Les fabricants cosmétiques et alimentaires l’utilisent souvent pour cette raison. Ces utilisations sont également désirées par les sociétés pharmaceutiques. Les différents avantages travaillent ensemble pour créer un processus de fabrication plus paisible.
Le Dioxyde de silicium possède une haute porosité ce qui lui permet d’absorber jusqu’à 300g de fluide pour 100g de silice. Cela signifie que les ingrédients liquides peuvent se transformer en poudres fluides avec facilité. Il agit comme une substance glissante, une substance utilisée dans une formule pour améliorer ses qualités fluides. Il assure que le produit s’écoule au travers de la machinerie et ne colle pas à l’équipement. L’utilisation de silice augmentera également la stabilité de l’API sensible à l’humidité. Cette capacité réduira les quantités de traces d’humidité qui peut causer une dégradation de machinerie. Il a une absorption de l’humidité unique. Cela encourage la fabrication rapide de comprimés grâce à sa résistance au bouchage et au collage.
Le Dioxyde de silicium est un élément intéressant qui est abondant sur la Terre. Il est partout sur la Terre et constitue jusqu’à 60% de la croûte terrestre et 93% des roches connues. Il est également connu sous le nom de quartz. Il est trouvé dans nos tissus corporels, les plantes et dans notre nourriture. Il est une nécessité pour des os, une peau, des cheveux, des dents et ses ongles sains. Un manque de Dioxyde de silicium peut avoir pour conséquence une pauvre formation osseuse, une peau et des dents en mauvaise santé.
Il est important de manipuler le Dioxyde de silicium correctement. Cela augmentera la durée de vie des produits et gardera les personnes saines. Il peut irriter les yeux et la peau si ils y sont exposés. Si le produit est manipulé correctement, il restera en excellente condition jusqu’à ce qu’il soit prêt à être utilisé.
Le Dioxyde de silicium est un excipient multifonctionnel populaire. Il est efficace et rend le processus de fabrication plus efficace.
Rédigez votre propre commentaire
Are all excipients safe for all ages to consume?
Yes, it does not matter what age, size or sex the person consuming the products is. It is, however, important to check the intolerance data.
Are all the excipients safe for human consumption?
Yes, all of the excipients are safe for human or animal consumption. There are some precautions that should be taken when handling them and there are some people that might have intolerances to some of them. Information on this can be found in the products MSDS and Intolerance Data Sheet. This can be found in this section for every excipient.
Are there any known allergens or health risks?
Can I get a better price for excipients than is listed on the website?
Yes, we have bulk pricing for all of our excipients, and these can be found in this section. We offer bulk in 500 kg, 1 ton, 2 ton and 5 ton lots. The prices are set on these quantities as these are the amounts that will fit on pallets.
Can I have a CoA for my Excipient?
Yes. CoA stands for Certificate of Analysis this is also known some times as an MSDS (Material Safety Data Sheet) all of the information contained in a CoA is inside the MSDS for every LFA product which is emailed to you after purchase.
Dissolving rate? Any known factors that can affect the rate, speed up or slow down the breakdown of a tablet?
Yes. There are two things at play here. You can get hygroscopic and hydrophobic excipients. Hygroscopic means that they take on water quickly, while hydrophobic means that they repel water.
There are products know as supper disintegrants. These products help the breakdown of tablets. At the moment LFA does not sell any supper disintegrants.
Magnesium stearate is hydrophobic this means that it will slow the breakdown of a tablet.
However, it is used in such small amounts that most of the time it will not make a difference to our customer's products. If they would like to be sure then they should conduct what is known as a disintegration test.
How long is the storage period of each excipient? What is the shelf life?
Firmapress - 2 years form batch date.
Dextrose - 3 years from batch date.
Dicalcium Phosphate - 3 years from batch date.
Microcrystalline Cellulose -
Magnesium stearate -
Lactose - 2 years from batch date.
Silica Dioxide - 2 years from batch date.
How should I clean contact parts that have come into contact with my excipients or active ingredients?
here are 6 steps that should be followed as a general rule of thumb when cleaning contact surfaces that have come into contact with powders:
Dry Clean - First you need to remove as much of the dry powder as possible. You can do this using a hover/vacuum. Make sure that the vacuum you are using has a filter good enough to handle fine dust.
Wet Clean - Next you need to perform a wet clean. This can be done with warm water and soap or if available an ultrasonic cleaner.
Rinse - Next you need to rinse off any soap with potable water (drinking water). You do not have to do this if you used an ultrasonic cleaner in the last step. It is important to ensure that all parts are thoroughly dried immediately after washing to avoid any rusting.
Sanitise - Next you need to sanitise the surface. This step is recommended by the FDA. There are a number of sanitising solutions available designed to be applied and left on.
Lubricate - You now need to lubricate any parts that require it. This should be with the appropriate grade oil or grease considering your use and greasing chart. Store - Finally store any of the parts in a cool dry place. If you are storing them on the machine then make sure the machine is in a temperature controlled environment with low humidity.
What is the mesh size of your excipients? etc.
Dextrose - approx 100 mesh
Dicalcium Phosphate - approx 100 mesh
Microcrystoline Cellulose - approx 120-200
Magnesium sterate -
Lactose - 80 mesh
Silica Dioxide -
Firmapress - 100-200 mesh
What kind of agent is each excipient?/ What is the main use of each excipient?
Dextrose - Sweetener, binding agent, good for chewable tablets or candy.
Microcrystalline Cellulose - Binder, filling agent. Good at binding tablets and making them bigger. It can also be used as a filler for capsules.
Magnesium stearate - Dry Lubricant. This stops products from getting stuck to the tooling. It can also help with powder flow issues and caking issues.
Lactose - Binder, sweetener and bulking agent. It has a large mesh so it flows well but most people do not like it because of the intolerance issues.
Silica Dioxide - Flowing agent. This assist powders in flowing smoothly through the machines. It also helps with cacking issues where powders get stuck to the machine.
What kind of condition should excipients be stored in?
Firmapress - 2 years form batch date.
Dextrose - 3 years from batch date.
Dicalcium Phosphate - 3 years from batch date.
Microcrystalline Cellulose -
Magnesium stearate -
Lactose - 2 years from batch date.
Silica Dioxide - 2 years from batch date.
Which excipient should I add if the product doesn't bind well?
If your product does not bind well then we would recommend using MCC. This can be used in any % the limiting factor is the size of the tablet.
If the amount of MCC you would have to use would be too much or if you do not want to use MCC then you have 3 other options: Ask your supplier for a directly compressible or tabletable grade of your product. Spray dry your product. Wet granulate your product.
Which excipient should I add if the product is sticky?
If your product is sticky then you will need to add a dry lubricant to your mix. For this, we recommend magnesium stearate.
We do not recommend that you add more than 1% to the mix as more than this can cause capping. If your product is still sticky at this point then we would recommend looking into granulation.
Which excipient should I add if the product/API is clumpy?
If your product or API is clumpy then you will need to add an anticaking agent. For this, we recommend silicon dioxide. We only recommend adding a maximum of 2% of this to the mix
Stéarate de Magnésium29,99 $US