HSTP Comprimitrice Rotante

Yes, you can, but there are a number of requirements that we need to fulfill first.

You will need to contact our team and provide them with a copy of all of your MSDSs for all of the components of your mix.

We need to have a good understanding of your business and the challenges you are facing.

You will also need to book an appointment with the office that you would like to visit.

For more information please get in contact with the team: https://www.lfatabletpresses.com/contact

Yes. Very easily.

We have free lifetime technical support for all machines sold by LFA.

Just contact us with your machine serial number and we would be happy to help you with any problems.

Yes. You can order custom tooling here

Yes, the TDP and RTP range all have a weight adjustment for it.

on the TDP it is the bottom of the two cogs on the lower drift pin assembly.

Here is a link to a video showing you how to tune up the TDP 5: https://www.youtube.com/watch?v=4dTscUdRJzQ

Here is a link to a video showing you how to tune up the RTP 9 or the RTP 118: https://www.youtube.com/watch?v=YJFt5AFJ1hw

It is important to know that the exact weight of each tablet will vary from tablet to tablet.

A well-homogenized mix that has a consistent granule size should be able to achieve an accuracy of +/- 3% or less.

Certo, facciamo formazione. Teniamo corsi di addestramento presso i nostri uffici di Bicester. La durata dei corsi è di una giornata circa.

Molto poco. Il costo medio per una compressa prodotta da una fabbrica esterna si aggira intorno a 0,002€ - 0,006€ a seconda delle difficoltà di compressione e delle dimensioni del lotto di produzione. Ciò significa che una TDP 5 si ammortizzerà con sole 380.000 compresse. Al ritmo di produzione di 5.000 compresse all’ora, per rientrare nell’investimento bastano soltanto 76 ore.

No, there are 3 specifications for Rotary Press Tooling and a number of different sizes that fall under them. These 3 specifications are RTP, Euro, and TSM. Under TSM and Euro tooling specifications, there are 4 common sizes: B, D, BB, and DB.

In order to determine whether or not your machine is still under warranty, you will need to call or email the office the machine was purchased from, and provide the serial number.

As with any tablet press, it is good to have a particle size of around 80-60 mesh.

This would be large enough to avoid large losses and small enough to flow well through the machine. If the powder is finer than this then you are going to experience a larger level of loss.

If the particles are larger than this then it might not flow through the machine well and get caught as it is trying to enter into the die bore.

This being said every powder is very different and you will need to do tries to work out what is best for them.

We send out all machines with the local plug on and set up to run on the local power supply.

Get a capsule filler.

You will not be able to make tablets.

Click here for more information https://www.lfacapsulefillers.com/

There are a number of ways we are able to support you:

• Every machine comes with a full manual that is emailed to you after purchase.
• There is a large range of video tutorials to teach you how to use the press.
• The machine comes with lifetime technical support. You can call, Skype or email to get answers to your questions and problems.
• We also offer free training at any one of our regional offices.

If after all of this you are still struggling to use your press, we are able to come to you. This is a service we charge for.

More information on this can be found here: https://www.lfatabletpresses.com/services