TDP 1.5 Desktop Tablettenpresse

3.635,00 $
SKU
5060477550069

Die TDP 1.5 ist eine flexibel und einfach zu verwaltende Desktop-Format Tablettenpresse, die bemerkenswerte Mengen, Leistung und Flexibilität bietet. In der Lage mit Strom oder mit Handkraft zu laufen, ist dieses Gerät die perfekte Wahl für jeden, der eine hochwertige Presse für Kleinserien-Fertigung und Probeläufe benötigt, dies macht sie ideal für R & D oder ähnliche Anwendungen.

Connect with Our Team

If you have a question or would like more details on the TDP 1.5 Desktop Tablettenpresse, please complete the form below and someone from our team will be in touch with you soon.

Wenn Sie nach einer Tablettenpresse suchen, die Ihnen hilft neue Produkte oder Konzepte zu testen, bevor sie in die Fertigung gehen, dann haben Sie sie gefunden. Die TDP 1.5 kann Tabletten in verschiedenen Größen und in kleinen Mengen zu produzieren, und ist sicherlich das Gerät das zu Ihren Bedürfnisse passt. Hergestellt entsprechend den Anforderungen der Labor- und Entwicklungsanforderungen, anstatt für Produktion in großem Maßstab, ist die TDP 1.5 dennoch in der Lage jede Menge, von nur ein paar wenigen, bis hin zu 5.000 Tabletten pro Stunde.

Der Hauptvorteil dieser Tablettenpresse liegt in ihrer Vielseitigkeit, gepaart mit einem starken Feature-Set und der Premium-Qualität seiner Konstruktion. Die letztere garantiert hervorragende Zuverlässigkeit. Aus diesen Gründen ist die TDP 1.5 eine beliebte Option für den Einsatz in Forschungseinrichtungen, Laboren, Lebensmittel-Technologie-Anwendungen, pharmazeutische Entwicklungen, Chemieanlagen und Krankenhäusern oder jede Einrichtung wo insgesamt Flexibilität, einfache Bedienung, gute Menge und Qualität.

Hauptvorteile der TDP 1.5

  • Leichtgewicht für ihre Klasse
  • Kompakte Abmessungen
  • Schnell und zuverlässig
  • Flexible Ausgabe
  • Elektrisch oder manuell zu betreiben
  • Breite Rohstoff-Kompatibilität
  • Geringer Wartungsaufwand
  • Niedriger Verbrauch
  • Funktioniert mit 200 g Mindestmenge an Rohstoffen
  • Presst Tabletten in jeder beliebigen Form
  • Anpassungsfähiger Tabletten Durchmesser, Tiefe und Härte
  • Option für Stempel Design auf den Tabletten
  • Geeignet für Motive oder kontinuierliche Folie

Funktionen der TDP 1.5 Tabletten Presse

Die TDP 1.5 ist eine einzel Stanz Tabletten Presse und hat einen maximalen Druck von 15 kN. Sie wurde entworfen, um auf einer Bank installiert zu werden, kann aber auch problemlos abgenommen und verlegt werden. Das Gerät bietet eine einstellbare Füllung Tiefe mit einer maximalen Tiefe von 12 mm, und kann Tabletten mit bis zu 8 mm Durchmesser und 6 mm dicke produzieren. Die TDP 1.5 beschränken Sie nicht auf die auf Standard geformten Produkte. Durch einfaches wechseln der Form im Gerät können Sie nahezu jede beliebige Form von Tabletten pressen. Zusätzlich können Sie die Dichte der herzustellenden Tablette verändern. Die Maschine bietet auch die Möglichkeit zum Stempeln von Designs auf den oberen Teil der Tablette, entweder um ihr ein ansprechendes Finish zu geben oder zu Identifizierungszwecken. Durch die Attraktivität der TDP 1.5 für R & D Anwendungen, erklärten mehrere Nutzer, sie finden es einen hilfreichen Aspekt geringe Mengen an Tabletten, jeweils bestehend aus einer anderen Formulierung, für klinische Studien herzustellen.

Diese Presse ist kompatibel mit den meisten der granulierten oder pulverförmigen Materialien, aber ist nicht für die Verwendung mit übermäßig feuchten Substanzen oder superfeinen Pulver ausgelegt.
Mit dem Nutzen im Blick entworfen, ist die TDP 1.5 bekannt als eine hochfunktionelle Maschine, die entweder elektrisch angetrieben oder im manuellen Modus laufen kann. Im manuellen Modus wird die Presse nur einer Kurbel angetrieben. Kombiniert mit einer kleinen Basis und geringem Gewicht für eine Presse dieser Spezifikation, macht diese Vielseitigkeit die TDP 1.5 flexibler und portabler als andere Maschinen, die mit entsprechenden Gesamtleistungen aufwarten.

Technische Daten

Die Abmessungen der TDP 1.5 sind 700 mm x 400 mm x 800 mm, und das Gewicht beträgt 55 kg. Sie hat eine Turm Geschwindigkeit von 1.400 U/min während sie mit Strom betrieben wird und der Motor hat eine maximale Leistung von 0,75 kW bei einphasigem Gebrauch und 0,55 kW bei dreiphasigem Einsatz. Das Gerät kann an Netzspannung laufen die entweder 110V oder 220V beträgt.

Die TDP 1.5 Tablettenpresse im Betrieb

Diese Presse ist bemerkenswert einfach zu bedienen, und trotz ihrer kompakten Größe bietet sie einige Vorteile, die sie von vergleichbaren Geräten unterscheidet.

Um die Presse von Hand zu bedienen füllen Sie einfach die die Rohprodukte in den kegelförmigen Behälter, dann fassen Sie das Rad und drehen es vorsichtig. Tabletten werden dann erscheinen und sind bereit in Flaschen abgefüllt zu werden. Es ist ein ganz einfacher Prozess, den jeder schnell erlernen kann. Wenn Sie einfach ein paar Tabletten machen, dann haben Sie den Bogen schon heraus. Das ist ein Hauptmerkmal dieser Presse. Alternativ, wenn Sie eine größere Charge von Tabletten benötigen, dann stecken Sie einfach den Stecker in die Steckdose und sie wird schnell und effizient mit elektrischer Energie funktionieren.

Herstellung und Prüfung von Produkten erfordert oft die Entwicklung von Produkten mit ähnlichen, aber etwas abwechslungsreichen Formulierungen. Die TDP 1.5 hat einige Merkmale, wodurch sie besonders für diesen Zweck geeignet ist.

Zunächst einmal ist es eine hocheffiziente Presse, die es bei geringer Nutzung möglich macht, mehr Tabletten aus eine bestimmte Menge an Rohstoffen zu erhalten. Zweiten, ein besonderer Vorteil ist es das die TDP 1.5 mit einer Mindestmenge von nur 200g an Material betrieben werden kann. Das ist wirklich ideal für Forschungs- und Bildungsarbeit bei der man einfach nur ein paar Tabletten Vorversuche drücken möchte. Später, wenn Sie vielversprechende Formeln ermittelt haben, verwenden Sie die TDP 1.5 für größere Chargen für den Lauf von vollständigen Tests.

Drittens, die TDP 1.5 erlaubt es, die Wirksamkeit des Testverfahrens zu gewährleisten, indem sichergestellt wird, dass man leicht erkennen kann was produzieren wurde. Dies ist entscheidend, um sicherzustellen, dass die richtige Formel das richtige Thema zur Verfügung gestellt wird. Die TDP 1,5 erfüllt dieses Problem aufgrund der Leichtigkeit, mit der Sie die Form, Größe oder das Design der Tabletten ändern die Sie machen. Vorausgesetzt, Sie haben eine Form für das Design, welches Sie gerne machen wollen, können Sie den Stil sofort wechseln, durch Abnehmen des Trichters und Abschrauben des Feeder-Mechanismus.

Sie können auch rasch die Dichte und das Gewicht der Tabletten an der TDP 1.5 verändern, lediglich durch abschrauben einer Nuss an dem Pleuel und Sie ändern den Druck der TDP 1.5.
Wartung der TDP 1.5 ist ein anspruchsloses Unterfangen. Nichts weiter als ein oder zweimal im Monat eine Begutachtung und schmieren und Ölen der beweglichen Komponenten. Die Ausrüstung wurde gebaut, um diesen Vorgang so einfach wie möglich zu machen.

Unsere Meinung

Die TDP 1.5 repräsentiert einen außergewöhnlichen Wert und bietet unübertroffene Anpassungsfähigkeit. Einfache Wartung sowie die Wahl zur Herstellung von Kleinserien von Hand macht diese zu einer sehr guten Maschine, während die Fähigkeit, auf elektrische Energie zu verzichten und auch größere Chargen von bis zu 5.000 Tabletten pro Stunde zu produzieren, macht sie zu zwei Geräten in einem. Es überrascht nicht das die TDP 1.5 zu den beliebtesten Maschinen ihrer Klasse gehört.

Name Wert
Produkt TDP 1.5
Anzahl der Matrizen 1
Max Druck (kN) 15
Max Durchmesser der Tabletten (mm) 8
Max Fülltiefe (mm) 12
Max Dicke der Tabletten (mm) 6
Max Produktions Kapazität pro Stunde 5.400
Anzahl der Füllstationen 1
Doppelschichttablette Nein
Motor (kW) 0,55
Anzahl der Phasen 1
Ampere 13
Volt 240V (auf Wunsch auch 110V)
Höhe (mm) 800
Breite (mm) 400
Tiefe (mm) 700
Gewicht (kg) 53.5
Schreiben Sie eine Bewertung
Sie bewerten:TDP 1.5 Desktop Tablettenpresse
Ihre Bewertung

How Much Profit Will This Machine Generate?

Are you able to calculate the amount of profit your business generates per tablet? If so, this calculator will be able to tell you how many hours you will have to run this tablet press to cover its investment.

It will also be able to tell you the amount of profit it will generate every hour you run this tablet press, which makes this calculator a powerful tool when deciding on which tablet press is right for you or your business.

$

Profit Generated Per Hour

This machine returns it's investment in hours

All of the TDP range have flywheels except for the TDP 1.5, which has a gearbox. What is the advantage of this?

The advantage of the gearbox is that it has fewer open moving parts. This makes the press safer to use and easier to clean and maintain.

Are all the contact parts on the TDP 1.5 stainless steel?

No. Both the hopper and the boot are made from brass or plastic depending on when you bought your machine from LFA. We moved to plastic in mid 2019.

The standard tooling is made from S7 steel, but can be customized using different steel grades.

The base plate is machined from stainless steel.

Are parts interchangeable with the rest of the TDP range?

Yes. Some of them. There are a number of parts that are able to be changed between the different TDP ranges. This includes the tooling, a lot of the upper and lower drift pin assemblies and the boot bolt and spring.

Are the TDPs CE certified?

No, the TDPs are not CE certified. To acquire this certification, they would have to be installed in a protective cage, which we do not provide.

Are there safety devices in the TDP 1.5 to protect the user?

Yes, there is a stop button. We would, however, also recommend installing the TDP 1.5 in a cage or perspex box.

Can I come to one of your facilities for training with my own formula?

Yes, you can, but there are a number of requirements that we need to fulfill first.

You will need to contact our team and provide them with a copy of all of your MSDSs for all of the components of your mix.

We need to have a good understanding of your business and the challenges you are facing.

You will also need to book an appointment with the office that you would like to visit.

For more information please get in contact with the team: https://www.lfatabletpresses.com/contact

Can I get support from LFA if I face problems with making tablets?

Yes. Very easily.

We have free lifetime technical support for all machines sold by LFA.

Just contact us with your machine serial number and we would be happy to help you with any problems.

Can I make food grade products on this machine? Can I also make pharmaceutical-grade tablets?

Yes, the contact surfaces are all food and pharmaceutical safe.

They are made from a combination of, stainless steel, chrome coated brass and the steel used for your tooling (often S7).

As such they are all compliant with most rules for food or pharma manufacturing.

We strongly recommend that you check your local laws as these do vary from state to state and country to country. If in doubt reach out, and we will be happy to find out.

Can I make shaped tablets? Or with a logo?

Yes, you can.

You are able to make any shaped tablet up to the maximum diameter of this tablet press which can be found under the "specifications" tab.

We are able to customise tooling to include lettering, numbering and logos. If you would like customised tooling please fill out our custom tooling form: www.lfamachines.com/custom-tooling

Can I order custom tooling?

Yes. You can order custom tooling here

Can this machine be left without an operator?

No.

LFA does not recommend leaving any of its machines unattended without an operator ever. Even if they only need to step away for a short amount of time, the operator should turn off the machine.

This will avoid damaging it in the event that there is a jam and the operator is not there to switch it off.

Can you set this machine up for an custom mg tablet weight?

Yes, the TDP and RTP range all have a weight adjustment for it.

on the TDP it is the bottom of the two cogs on the lower drift pin assembly.

Here is a link to a video showing you how to tune up the TDP 5: https://www.youtube.com/watch?v=4dTscUdRJzQ

Here is a link to a video showing you how to tune up the RTP 9 or the RTP 118: https://www.youtube.com/watch?v=YJFt5AFJ1hw

It is important to know that the exact weight of each tablet will vary from tablet to tablet.

A well-homogenized mix that has a consistent granule size should be able to achieve an accuracy of +/- 3% or less.

Could I make effervescent tablets with a TDP 1.5?

Yes, you could but they would be quite small. Most effervescent tablets are larger to accommodate the large amount of actives that they have to hold. The TDP 1.5 is only able to make a tablet up to 8mm in diameter, so we do not recommend it for anything larger than that, unless it has been tested first.

Do all TDPs and the VICE take the same tooling?

It is important to know two things:

Firstly, TDP Universal Tooling came into effect in 2018. Machines brought from LFA before this time may be slightly different sizes. We always recommend checking the size of your tooling before placing your order.

Secondly, a number of companies make unofficial TDP tablet presses.

They do not always conform to the same sizes, tolerance or quality as LFA TDPs or tooling. If you bought your press from someone else other than LFA, we are not able to guarantee that our tooling will fit.

Do I get a die with the machine or do I have to buy it separately? Which size/shape are they?

Yes, you do get a die with the machine. Every machine comes fitted with a die.

If you would like you can get this customised with your logo or lettering but it takes 6-8 weeks.

Or, we have a standard 8mm round, bevelled edge with breaker installed in the machines in stock.

Do I need a license to own this machine?

That depends on the country you are located in.

In the EU and UK no. You do not need anything to buy the press.

In the USA we have to file a piece of paperwork with the federal government when we sell the press.

We, however, do all of this paperwork for you and do not need to do anything.

The only countries that require a license, as far as we know, are Canada and Australia.

If you are located in Canada then we recommend that you contact Health Canada prior to placing your order. Details regarding the import process can be found at the following link: Importing and registering pill presses (designated devices)

The document you need to fill out and file for a purchase originating in Australia is called a B712. This can be found at: https://www.abf.gov.au/form-listing/forms/b712.pdf. If you would like to speak with one of our team about this, then please get in contact.

Do you have a video on your website showing me how to use the TDP 1.5?

Yes, we do. Here is a link to a video that shows you how to set up your TDP 1.5 once you receive it: TDP 1.5 Unboxing & Setup

Does the machine need to be bolted down? Does it come with bolts to fix it to a surface?

No, it does not need to be bolted into position but we do recommend it. If the machine is not secured in position by bolts or another method then it is more likely to shake a bolt loose, resulting in varying tablet weights. On top of this, the vibrations are likely to make the machine sound louder.

The machine does not come with bolts because we do not know the thickness of your surface.

Does the TDP 1.5 have a variable speed?

The TDP 1.5 does not have a variable speed adjustment. It is possible to fit the press with a speed adjustment but it is not something that LFA offers as a service.

Does the TDP 1.5 do anything the TDP 5 cannot?

The TDP 1.5 is a little lighter than the TDP 5. It does not have a belt and exposed gears, but this does not affect its ability to make a tablet. The only thing it can not do is exert 50 kN of pressure.

Welche Ausbildung bieten Sie mit dieser Maschine an?

Wir können Ihnen eine Ausbildung in unserem Büro in Bicester, England. Es wird etwa ein Tag dauern.

Does this machine give any data? (e.g weight, pressure or production readouts)

The TDP 1.5 does not come with pressure load cells. It is not possible to fit them to the press.

How do I know when is the best time to change the tooling? In other words, what is the lifetime of the tooling for this machine?

The tooling on the TDP 1.5 is extremely durable. The life of your tooling, however, will depend on a number of things. This includes the shape of your tooling, the formulation of your mix, and the steel that the tooling is made from.

There are a number of questions to ask when determining the life of your tooling:

Does it have any chips or damage to the edge of the upper and lower punch? This section is called the land. If this is damaged it will show up in each tablet as a defect.

Do the tip faces of the punches have any cracks in them?

Is there a pitted look on the top or bottom punch face?

If you measure the working length of the upper and lower punches are they still within tolerance?

Is the upper or lower punch loose within the die bore?

Does the wall of the die bore have obvious scratches or scrapes on it?

Are you still clearly able to see the image, lettering, number or logo in the face of every tablet?

If your tooling shows any of these signs, then it could indicate that it is time to replace it.

How do I replace the tooling on the TDP 1.5? Is it the same as on the TDP 5?

Yes, it is almost completely the same as how you change the tooling on the TDP 5. The only difference is how you use the hand wheel to change the position of the machine so that you are able to complete the process.

Here is a link to how to change the tooling:How To Change A Die | Chaning a TDP Tablet Press Punch Die

How do I set the pressure correctly?

The upper drift pin assembly is used to adjust the pressure. You can watch a video on this here: www.youtube.com/watch?v=pc2gfDU3NiQ

Here is another video which tells you how to set up a TDP ready to press: www.youtube.com/watch?v=4dTscUdRJzQ

How do you move/install this machine?

There is a bolt eyelet on the top of the machine.

We recommend using an engine hoist to lift the machine off the shipping crate and into the position that you are going to use it in.

 

How long does it take to do maintenance on the TDP 1.5?

It takes about 1-2 hours to clean, disassemble, and grease a TDP 1.5. We recommend that this is done at the end of every run to ensure the maximum life of your machine.

How often do I need to grease the machine, and which parts particularly of the machine should I lubricate?

We would recommend cleaning down the machine and leaving it re-greased after every use. This will ensure the longest life possible.

Here is a video on cleaning the TDP 5.

When greasing the machine, avoid getting any grease near the tooling or pressing surfaces, as this will get into your tablets and affect your powders.

Grease the top cam well, then apply a small amount to the upper drift pin assembly and the lower timing rod.
 
With regards to the types of grease or lubricant that we would recommend, this will depend on your product. If you are making food grade products, then you would want to use a grease that was NSF approved. If you are making a very caustic sodium based product, however, then you would need to use a product that is resistant to salts.

More information on greasing your machine can be found here: TDP 5 Lubrication Schedule

Wie schnell wird die Maschine amortisiert?

Sehr schnell. Die Durschschnittskosten pro Tablette wenn Sie es mit einem Auftragsfertiger produzieren, ist £0.002 - £0.005 (kommt drauf an wie schwierig es zu pressen ist und die Größe des Laufs). Das heißt eine TDP 5 wird sich amortisieren in 380,000 Tabletten. Wenn Sie 5000 Tabletten pro Stunde produzieren, ist es nur 76 Stunden.

How would I know if TDP 1.5 has enough power for my product or if I should get a TDP 5 or TDP 6s?

The easiest thing to do is send LFA some of your product for us to test.

This is not a free service, we do charge for this but it could save you buying the wrong machine.

More information can be found on this service here: https://www.lfatabletpresses.com/services

I am just starting out and I am not sure which machine I should order - the TDP 0, TDP 1.5, TDP 5 or TDP 6s?

This is a common question, and we have tools to help you:

A video on the differences between the different TDP's - www.lfatabletpresses.com/videos/tdp-range

The Right Machine For You Questionnaire - https://www.lfatabletpresses.com/tablet-press-questionnaire

These will explain the different machines, and give you a much better idea. If you are still unsure, please do reach out, let us know what you are making and the quantity, and we will help to guide you through the process.

Is 15kN enough pressure to make a strong tablet?

Yes, you can make very strong tablets with 15kN. It will, however, depend on more than just the pressure. The size, shape, and formula will also determine the quality and strength of a tablet regardless of the machine. Increasing the pressure does not guarantee that your tablet will be stronger.

Is it possible to fit a bigger motor on the TDP 1.5?

It might be possible, but it is not recommended.

The motor that is on the press has been carefully selected to match all of the other parts on the press. Switching the motor for a bigger or faster one could cause excessive pressure in other areas of the press resulting in machine damage.

If you think that you require a machine with more speed or higher pressure then we would recommend that you look into a TDP 5 or RTP rotary tablet press.

Is it possible to get a bigger manual hand wheel on the TDP 1.5 tablet press?

Apart from the tooling, we do not offer customizations on any of the LFA Tablet Presses. The TDP 1.5 has been designed with exact tolerances and forces in mind. Changing these might prevent your press from performing as intended.

Is the machine ready, so I just plug it in and start with my production? If not, what are the steps I need to do before that? What is the installation process?

Yes, the machine comes ready to plug in and go.

It is important to remember that the TDP 1.5 weighs 60 kg, so we recommend securing it to a benchtop. This should be done before running the machine for the first time.

You will also need to tune your TDP 1.5 before using it. We do not recommend just pouring in your mix and turning on the machine. Doing this will likely cause a jam and/or damage to the machine.

Is the pressure of TDP 1.5 strong enough to make consistent herbal tablets?

Yes, it can be, but as with all products it has to be tested. It is impossible to say if every herbal product will bind because it will depend on the total tablet mix and the shape and size of the tablet.

Is the TDP 1.5 a TDP 0 with an electrical motor attached to it?

No. It is not they are completely different presses.

Is there a larger hopper available for the TDP1.5?

No, we do not offer a larger hopper for any of our presses. This is because the TDP 1.5 should not be left unattended at any time. This also prevents particle separation, where the larger particles in a mix rise to the top of the powder. The vibrations of the TDP 1.5 cause this to happen, but the hopper that is included has been designed to reduce the likelihood. If we were to attach a larger hopper then the chance of particle separation would dramatically increase.

Is there a system that allows customers to check the warranty period of their machines?

In order to determine whether or not your machine is still under warranty, you will need to call or email the office the machine was purchased from, and provide the serial number.

Is this machine electric or manually powered?

The TDP 1.5 has an electric motor as well as a small hand wheel located on the top of the gearbox.

We always recommend tuning your press by hand before running it under power.

We do not recommend using the TDP 1.5 for long periods of time by hand. The function of the small wheel is to tune and de-jam the machine.

The dies have become discoloured. Is this because of corrosion?

Yes, this could be down to corrosion or due to oxidation of your product. We would highly recommend taking your tooling out of the press and cleaning it at the end of every production run.

We would also recommend polishing the tooling to keep the surfaces clean and less likely to cause picking or capping.

The screw that holds the boot was damaged by the boot set screw. Did this happen because its knurled nut was tight against the base plate?

Yes, this can happen because the boot bolt and spring have been screwed too far into the press or have not been screwed in far enough. It is important to make sure that the bolt is in the correct position before over tightening the set screw.

It should be pointed out that it will not affect the operation of the press if it is damaged.

What are the construction materials of the TDP 1.5?

The TDP 1.5 has a cast steel base with an enamel coating. There are parts that have been milled from steel and brass.

The contact parts that the powders come into contact with are the steel hopper, the brass/plastic boot (depending on model), the steel of the tooling (this will change depending on tooling specification) and the steel tablet ejection tray.

Was ist der Unterschied zwischen der TDP 0, TDP 1.5, TDP 5 und TDP 6s?

Dies ist eine sehr Allgemeine Frage, wie alle Maschinen sind sehr ähnlich, aber ebenso haben unterschiedliche stärken.

Der einfachste Weg, um split-diese wäre in der automatischen und manuellen Maschinen.

Die TDP 0 ist die manuelle Variante, und Sie müssen Sie drehen Sie den Griff an der Seite zu produzieren, die Tabletten. Dies hat den geringsten Druck und ist das Einsteiger-Modell in die TDP-Bereich.

Die TDP 1.5, TDP 5 und TDP 6s sind alle Automaten, die durch einen Elektromotor angetrieben. Die TDP 1.5 ist das Einstiegsmodell in die automatische Maschinen, die es am wenigsten Druck auf 15kn es ist ebenfalls begrenzt die Größe der Tabletten, die Sie produzieren. Die TDP 5 ist unsere beliebteste Modell und produzieren rund 5.000 Tabletten pro Stunde. Die TDP 5 hatte 50kn Druck erzeugen kann Tabletten bis zu 22mm im Durchmesser. Die TDP 6s ist das top-Angebot der Maschine und ist geeignet, um unregelmäßig geformte Tabletten. Die TDP 6s hat auch etwas mehr Druck bei 60 Kn und ist besser geeignet für bestimmte Produkte, die nicht in form von Tabletten als leicht.

What is the length of the warranty? And what are the terms and conditions?

The length of the warranty on any of the TDP range machines is 1 year from the date of purchase.

This warranty covers spare parts and excludes tooling and maintenance labour from LFA for machine services.

When you receive your machine, you will be given a serial number that will also be stamped onto the press. You will be able to use this if you ever need to make a warranty claim.

Full details on the LFA warranty can be found here: Warranty | We Have You Covered

Welche ist die beliebteste Tablettenpresse?

Die TDP 5. Zweifellos ist diese das beliebteste Modell eine Zeitlang schon. Wir haben Kunden, die zurück kommen und sich mit Einer RTP 9 aktualisieren (normalerweise nach ein paar Jahren) aber meiste Kunden fangen mit einer TDP 5 an.

What kind of tablets would you recommend using a TDP 1.5 for?

The TDP 1.5 is recommended for any tablets that are smaller than 8 mm and bind fairly well, rather than for a specific type of tablet or product. If you are unsure, then it is best to have the product tested. More information can be found on this service here: Services | Why Choose LFA Tablet Presses

What particle size will work on this machine?

As with any tablet press, it is good to have a particle size of around 80-60 mesh.

This would be large enough to avoid large losses and small enough to flow well through the machine. If the powder is finer than this then you are going to experience a larger level of loss.

If the particles are larger than this then it might not flow through the machine well and get caught as it is trying to enter into the die bore.

This being said every powder is very different and you will need to do tries to work out what is best for them.

What plug does this machine come with?

We send out all machines with the local plug on and set up to run on the local power supply.

What PPE equipment is needed to use this machine?

We would recommend using goggles, a dust mask and gloves at a minimum, but you may require a lot more depending on the products that you are working with, and your local health and safety laws.

What should I do if my powders do not bind into a solid tablet? Should I buy TDP 5 or 6s?

It depends on how close you are to forming a tablet with the TDP 1.5. If the tablet binds but gets chipped or damaged during ejection, or falls apart when inside a container, then moving to a TDP 5 or 6 might give you the extra force you need to make your tablet work.

If however, your tablet comes out of the TDP 1.5 as dust, then it is unlikely that the problem you are facing has to do with the amount of pressure that you are applying.

What should we do if we don't want to use any excipients, especially binders?

Get a capsule filler.

You will not be able to make tablets.

Click here for more information https://www.lfacapsulefillers.com/

What technical support and training come with this machine?

There are a number of ways we are able to support you:

  • Every machine comes with a full manual that is emailed to you after purchase.
  • There is a large range of video tutorials to teach you how to use the press.
  • The machine comes with lifetime technical support. You can call, Skype or email to get answers to your questions and problems.
  • We also offer free training at any one of our regional offices.

If after all of this you are still struggling to use your press, we are able to come to you. This is a service we charge for.

More information on this can be found here: https://www.lfatabletpresses.com/services

Where is this machine made and shipped from?

All of our machines are made by us in Taiwan, and are shipped to you from our nearest office.

We have offices in the UK, USA, Germany and Taiwan.

Because they are made by us, we are able to control quality and give you the best support possible. And because they are shipped from your local office, wait times are reduced and customs clearance is avoided, ensuring you have support in your time zone in a language that is convenient to you.

Which parts wear most often and should I keep a regular stock of?

The most common part to wear out on the machine is the boot. This comes in direct contact with the die cavity and can be hit or chipped by the upper and lower punches. This is made of brass so that the tooling is protected in the event of a collision. Because of this, the boot is soft and will wear over time. If anything, we recommend keeping a spare to avoid losing production time.

We also recommend that you keep at least 1 spare set of tooling as this can break or wear over time.

LFA aims to hold all major spare parts and tooling in stock so that they are ready to ship out in the event that you need them. The lead times on sold out parts, however, can take up to 6-8 weeks

Will the parts to my TDP 0 fit a TDP 1.5 or TDP 5?

There are a few interchangeable parts if both machines have been made by LFA Machines. From the TDP 0, this includes the tooling, the lower drift pin assembly, and its corresponding set of cogs.

The most important fit to check for is tooling that you may have previously purchased, because the base plates have been redesigned to fit the universal standard tooling die.

More information on the TDP Universal Tooling Standard can be found here: Tooling | Punch & Dies for TDP Pill Presses

All other parts are custom to this press.

Will the parts to my TDP 0 fit on a TDP 1.5?

Yes, some parts are interchangeable if both machines have been made by LFA Machines. The upper drift pin assembly and the lower drift pin assembly will fit.

The most important fit to check for is tooling that you may have previously purchased, because the base plates have been redesigned to fit the universal standard tooling die.

More information on the TDP Universal Tooling Standard can be found here: Tooling | Punch & Dies for TDP Pill Presses

Would it help if we granulate the mix first?

There are three reasons to granulate your formula:

1. To improve the flowability of your formulation.

2. To make your formulation more compressible.

3. To ensure a consistent spread of API throughout the formulation.

If you would like to find out if your mix needs granulation then we do have a tablet formulation service available.

You can find out more about the tablet formulation service here: https://www.lfatabletpresses.com/services

Frequently Bought Together
  1. TDP Stanzmatrize
    TDP Stanzmatrize
    Starting from Special Price 134,99 $
© 2024 LFA Machines Oxford LTD. Alle Rechte vorbehalten.